background image

English-10

  AUDIO

Controls the volume of the speakers or headphones. 
To mute the speaker output, select Audio icon and touch “INPUT/RESET”.

 

BRIGHTNESS

Adjusts the overall image and background screen brightness. 
To enter the ECO MODE, touch the “INPUT/RESET” button. 
  ECO MODE OFF: Sets brightness variable from 0% to 100%.
  ECO MODE1: Sets brightness 80%.
  This setting automatically adjusts brightness within a power consumption range that meets Energy Star  
  measurement conditions. 
  ECO MODE2: Sets brightness 40%.
  This setting can adjust brightness within the range that power has reduced 38% from maximum brightness setting.

 

CONTRAST

Adjusts the image brightness in relation to the background.

 

AUTO CONTRAST (Analog input only)

Adjusts the image displayed for non-standard video inputs.

 

AUTO ADJUST (Analog input only)

Automatically adjusts the Image Position, the H. Size and Fine setting.

 

LEFT/RIGHT (Analog input only)

Controls Horizontal Image Position within the display area of the LCD.

 

DOWN/UP (Analog input only)

Controls Vertical Image Position within the display area of the LCD.

 

H. SIZE (Analog input only)

Adjusts the horizontal size by increasing or decreasing this setting.

 

FINE (Analog input only)

Improves focus, clarity and image stability by increasing or decreasing this setting.

  COLOR CONTROL SYSTEMS

Five color presets (9300/7500/sRGB/USER/NATIVE) select the desired color setting.

 

COLOR RED  

Increase or decreases Red. The change will appear on screen.

 

COLOR GREEN 

Increase or decreases Green. The change will appear on screen.

 

COLOR BLUE

Increase or decreases Blue. The change will appear on screen.

 

TOOL

Selecting TOOL allows you to get into the sub menu.

 

FACTORY PRESET

Selecting Factory Preset allows you to reset all OSD control settings back to the factory settings. The INPUT/RESET 
button will need to be held down for several seconds to take effect. Individual settings can be reset by highlighting the 
control to be reset and touching the INPUT/RESET button. 

 

EXIT

Selecting EXIT allows you exit OSD menu/ sub menu.

 

LANGUAGE

OSD control menus are available in nine languages.

Summary of Contents for AccuSync AS203WMi



















Reviews: