manualshive.com logo in svg

NEC A1160, Technical Overview

Share
Download
NEC A1160 Technical Overview Download Page 48

Components on the Front of a Cell 

 

4-2  

 

Cells

 

A cell contains the physical resources of the system: instruction processors, memory, 
input/output devices, peripheral storage devices, management board, fans, power 
supplies, EXPRESSSCOPE® Monitor, and so on. Each system comprises one to four 
cells. 

 

Maintenance LAN (MLAN)

 

The maintenance LAN (MLAN) connects the internal components of the system. 

 

Partition

 

A partition is a combination of one to four cells that runs a single instance of an 
operating system or virtual machine monitor. The operating system can be Red Hat 
Linux, SUSE Linux, or any supported Windows operating system. The virtual machine 
monitor can be VMware ESX or Xen. You can purchase the operating system or virtual 
machine monitor from NEC or supply it yourself. 

A system comprises a minimum of one and a maximum of four partitions. 

 

Service Processor

 

Each cell has an internal management board. For each partition, one of the partition’s 
management boards serves as the Service Processor. (Other management boards in 
the partition are called satellite management controllers.) A Service Processor manages 
and maintains the partition, monitors the system for hardware problems, and allows you 
to repartition the system. 

The system’s management firmware resides on flash memory on the management 
board and provides the Service Processor functionality. Using a Web browser, you 
connect to the remote console interface to maintain, monitor, and repartition the system. 
The management board also includes the BIOS and Console Manager firmware. 

 

Network Components 

Your network environment can include the following components. 

 

Public LAN

 

The public LAN is the customer’s internal production network that connects the servers, 
workstations, and so forth of an enterprise. It is sometimes referred to as the enterprise 
LAN. 

 

Summary of Contents for A1160































































Reviews:

No comments

Brands by name

Popular brands

Load more brands