manualshive.com logo in svg

NEC A1160, Technical Overview

Share
Download
NEC A1160 Technical Overview Download Page 21

Processors

 

2-3

 

Figure 2-2 

shows the location of the processor sockets (along with the processor 

number) on the processor board. 

 

Figure 2-2 Processor Socket Location on Processor Board 

Supported Processors 

Express5800/A1160 systems support the following Intel Xeon processor 7400 series 
(Dunnington) processors: 

•

 

Model E7440 (2.4 GHz with 2 x 3-MB L2 cache, 16-MB L3 cache, quad core, 1066 
MHz front-side bus) 

•

 

Model X7460 (2.66 GHz with 3 x 3-MB L2 cache, 16-MB L3 cache, hex core, 1066 
MHz front-side bus) 

Check with your sales representative for the availability of a specific processor. 

Multicore Processors 

Multicore processors contain four or six complete physical processors (cores) in the 
same integrated circuit. A quad-core processor (four cores) can appear as four logical 
processors, and a hex-core processor (six cores) can appear as six logical processors. 

Extended Memory 64 Technology (EM64T) 

The Xeon processors support the Intel EM64T technology. EM64T is an enhancement 
to the 32-bit Intel architecture. It allows a processor to run 64-bit code and access larger 
amounts of memory. Processors with Intel EM64T support 64-bit operating systems 
from Microsoft, SUSE, and Red Hat. Processors running in legacy or 32-bit mode 
remain fully compatible with existing 32-bit applications and operating systems. 

Rules for Mixing Processors 

Intel supplies different types, or families, of processors, such as the Intel Xeon 
processor family. In addition, processors within a given family can have different 

Summary of Contents for A1160































































Reviews:

No comments

Brands by name

Popular brands

Load more brands