78K0/Lx3 - See it!
User’s Manual
U18759EE2V0UM00
67
(7)
[Autoprocedure(EPV)] command execution
Select [Device]
→
[Autoprocedure(EPV)] from the menu bar.
When the [Autoprocedure(EPV)] command is executed, Blank Check
→
Erase
→
Program and
FLASH Internal Verify are executed sequentially for the
μ
PD78F0495 device.
Figure 66: After EPV Execution
(8)
Terminating the GUI
Select [File]
→
[Quit] to terminate the GUI software. All settings executed so far are saved in the
WriteEZ3.INI file, so that those settings can be reused when the GUI software is restarted.
(9)
Execute the “
VOLTMETER”
application
Set the
78K0/Lx3 - See it!
board to the normal operation mode (QB-MINI2 mode). < Plug and
Play> the
78K0/Lx3 - See it!
board to start in normal operation mode or press the reset button
SW4 to release the normal operation mode.
(10) Restarting the GUI
When the system is restarted, the same screen as shown in Figure 65: After Downloading
appears.
"...finish" is displayed.
