78K0/Lx3 - See it!
User’s Manual
U18759EE2V0UM00
46
8. WriteEZ3 FLASH programming software
8.1 Introduction
The parameter file for the 78K0/LF3 device is installed automatically during installation of WriteEZ3
GUI, folder < WriteEZ3 install-path>\PRM. Nevertheless, newest version of parameter file for the
μ
PD78F0495 device can by download from the NEC Electronics Web site.
Download the parameter file for the PG-FP4 from the following NEC Electronics Web site:
http://www.eu.necel.com/updates
Copy the parameter file downloaded from the NEC Electronics Web site into sub-directory
<WriteEZ3.EXE-install-path>\PRM created during GUI software setup (refer to
CHAPTER 7
SOFTWARE INSTALLATION
)..
8.2 Starting up the GUI Software
•
GUI software startup
Select WriteEZ3.EXE from the start menu to start the WriteEZ3 GUI software.
When the GUI software is started normally, the following screen appears.
Figure 37: GUI Software Main Window
Menu bar
Toolbar
Action log window
Status bar
Programmer
parameter
window
