NEC 42VP4A, User Manual

Page: 52 / 56

45
Screen Size
36.3"(H) 20.4"(V) inches
921(H) 518(V) mm
diagonal 42"
42VP4: Installed AR (Anti-Reflection) Filter
42VP4D: Installed AG (Anti-Glare) Filter
Aspect Ratio
16 : 9
Resolution
853(H) 480(V) pixels
Pixel Pitch
0.04"(H) 0.04"(V) inches
1.08(H) 1.08(V) mm
Color Reproduction 256 levels, 16,770,000 colors
Signals
Synchronization Range
Horizontal : 15.5 to 110 kHz
(automatic : step scan)
Vertical : 50.0 to 120 Hz
(automatic : step scan)
Input Signals
RGB, NTSC (3.58/4.43), PAL (B,G,M,N),
PAL60, SECAM, HD*
1
, DVD*
1
, DTV*
1
Input Terminals
(VIDEO1 and RGB1 can also be used as OUTPUT terminals)
RGB
Visual 1 (Analog)
mini D-sub 15-pin 1
Visual 2 (Analog)
BNC (R, G, B, H/CS, V) 1*
2
Visual 3 (Digital)
DVI-I 24-pin 1*
3
(Not compatible with analog input)
Video
Visual 1
BNC 1
Visual 2
RCA-pin 1
Visual 3
S-Video: DIN 4-pin 1
DVD/HD/DTV
Visual 1
RCA-pin (Y, PB[CB], PR[CR]) 1*
1
Visual 2
BNC (Y, PB[CB], PR[CR]) 1*
1,
*
2
Audio
Stereo RCA 3(Selectable)
External Control
D-sub 9-pin 1(RS-232C)
Sound output 8W+8W at 6 ohm
Power Supply
AC120V 50/60Hz
Current Rating
3.7A (maximum)
Power Consumption
270W (typical)
Dimensions
40 (W) 24 (H) 3.5 (D) inches
1018 (W) 610 (H) 89(D) mm
Weight
62.8 lbs / 28.5 kg (without stand)
Environmental Considerations
Operating Temperature
0°C to 40°C / 32°F to 104°F
Humidity
20 to 80% (no condensation)
Altitude
0 to 9180 feet / 0 to 2800 m
Storage Temperature
-10°C to 50°C / 14°F to 122°F
Humidity
10 to 90% (no condensation)
Altitude
0 to 9840 feet / 0 to 3000 m
Front Panel User Controls
Power on/off, Input source select,
Volume up/down, OSM control
Remote Control Functions
Power on/off, Input source select, OSM
control,Volume up/down, Cursor (UP,
DOWN,LEFT, RIGHT), Pointer, Zoom up/
down, Off timer, Wireless/ Wired remote
control
OSM Functions Picture (Contrast/Brightness/Sharpness/
Color/Tint/Picture mode/Noise reduction/
Color temperature/White balance/Gamma/
Low tone/Color tune), Audio (Bass/Treble/
Balance/Audio input), Image Adjust (Aspect
mode/V-Position /H-Position/V-Height /H-
Width/Auto Picture/Fine picture/Picture
adjustment), Option1 (OSM/BNC Input/D-
Sub Input/RGB Select/HD Select/Input Skip/
All Reset), Option2 (Power management/
Cinema mode/Long life [PLE, Orbiter,
Inverse, White, Screen wiper]/Gray level),
Option3 (Timer/Power on mode/Control
lock/IR Remote/Loop out/ID number/Video
wall [Divider, Position, Disp. mode, Auto ID,
Image adjust, Power on delay, PLE link,
The features and specifications may be subject to change without
notice.
*
1
HD/DVD/DTV input signals supported on this
system
480P (60 Hz)
480I (60 Hz)
525P (60 Hz) 525I (60 Hz)
576P (50 Hz) 576I (50 Hz)
625P (50 Hz) 625I (50 Hz)
720P (60 Hz) 1035I (60 Hz)
1080I (50 Hz) 1080I (60 Hz)
* 2 The 5-BNC connectors are used as RGB/PC2 and
HD/DVD2 input. Select one of them under “BNC
INPUT”.
*
3
Not compatable with HDCP.
Units are in inch
(mm)
3.5"
(89)
1.18"
(30)
2.32"
(59)
40" (1018)
24" (610)
36.3" (921)
20.4" (518)
42VP4/42VP4D
Specifications
Timer]), Advanced OSM, Language*, Color
system, Source information
*English, German, French, Italian, Spanish,
Swedish, Chinese
Other Features
Motion compensated 3D Scan Converter
(NTSC, PAL, 480I, 576I, 525I, 625I,
1035I, 1080I), 2-3 pull down Converter
(NTSC, 480I, 525I, 1035I, 1080I), 2-2
pull down Converter (PAL, 576I, 625I,
NTSC, 480I, 525I), Digital Zoom
Function (100-900% Selectable), Video
Wall 2
×
2/3
×
3 multi screen, Self
Diagnosis, Anti Image Burn (PLE
LOCK1~3, INVERSE, WHITE,
ORBITER (Auto1,2/Manual), SCREEN
WIPER), Color Temperature select (high/
mid/mid low/low, user has 4 memories),
Control lock (Except power SW), Auto
Picture, Input Skip, Color Tune, Low
Tone (3 mode), Auto ID, Programmable
Timer, Gamma Correction (4 mode),
Loop through interface, Plug and play
(DDC1, DDC2b, RGB3: DDC2b only)
Accessories
Remote control with two AAA batteries,
Power cord, User’s Manual, Safety metal
fittings, Screw for Safety metal fittings,
Ferrite cores, Bands, Cable clamps
Regulations
UL Approved (UL 60950/ CSA 60950)
DOC Canada requirements
Meets FCC class A requirements