27
Settings (M1)
Network (M18)
☛
1 8
/
For settings provided on the Network screen, see “Roaming” on page 15.
Reset settings (M19)
☛
1 9
This function will reset your phone to its factory settings.
,
By restoring the factory settings, any changes you have made to your phone EXCEPT the following will return to the factory settings (the
following data/settings will not be reset):
No. Security
1 Change PINs
Changes the PIN or PIN2 code (PIN activate setting must be turned on to change the PIN code).
2 PIN activate
Turns on/off the PIN code entry required at starting up the phone.
3 Change
security code
Changes the security code which is used to set some of functions and unlock the Personal Information Manager (PIM)
features.
2
The default setting of the security code is “0000”.
4 Phone lock
Turns on/off the Phone lock function which will lock the phone: you can only make emergency calls or enter the security code.
After entering the correct security code, you can use the phone normally.
2
Upon power-up, you are prompted to enter the security code if the Phone lock was active when the phone was powered
down.
5 Bar calls
You can bar the following calls made/received on your phone: all outgoing (dialled) calls, international outgoing (dialled) calls,
international outgoing (dialled) calls except to home, all incoming (received) calls or Incoming (received) calls when roaming.
,
Bar calls facilities are network services and may require a password.
1 Change settings
☛
Highlight the type of restriction and the call type, and then
➔
to save changes.
☛
Key in your bar calls password to verify user identification to the network
➔
SK1
to confirm
and save changes to the network.
2
The selected settings have red bars over their icons.
2 Set password
Changes the bar calls password.
6 Fixed dialling
Turns on/off the fixed dialling which restricts the use of dialled number to only the Fixed Dialling Numbers (FDN).
,
The FDN facility is network dependent.
/
See also: “Fixed dialling numbers (FDN)” on page 51.
