Page 10
2
Gatekeeper Connection Mode
1: No Gatekeeper
2: Manual setting *
3: Automatic setting *
* If set to 2 or 3 and a Gatekeeper cannot be
found, the VoIP PCB will not start.
1
Gatekeeper Address
¥ Required if the connection mode is set to 2
(Manual).
xxx.xxx.xxx.xxx
xxx: 0-255
0.0.0.0
Multi Cast Address
xxx.xxx.xxx.xxx
xxx: 0-255
The default should not be changed or the
operation of the VoIP PCB will be affected.
224.0.1.41
RAS Port
1024-65535
The default should not be changed or the
operation of the VoIP PCB will be affected.
1719
Multi Cast Port
1718
Gatekeeper ID
Up to 40 alphanumeric characters
GK_ID1
Alias Address
0123456789
3
First Payload Compression Type
(Transmit Voice Compression)
¥ Define the first priority payload when the VOIPU
negotiates with the destination.
(see Item 4 for option settings)
1: G.711
2: Reserved
3: G.729
4: G723.1
3
4
These set-
tings (except
for Payload
Mode) affect
the transmit
compression
type as well as
the receive.
Payload Settings
1-4
Payload Mode
(Receive Voice Compression)
¥ Define the availability of each
payload mode. If a specified
payload is defined as Dis-
able , the VoIP Call is not
available with this payload.
However, G.711 may not be set
as Disable as it must be
available for the VoIP call.
1 (G.711)
0: Disable
1: Enable
1
2 - Reserved
---
-
3 (G.729)
0: Disable
1: Enable
1
4 (G.723.1)
0: Disable
1: Enable
1
VIF Size
(Voice Frames per Packet)
¥ Define the packet size (byte)
for voice. If a small value is
used, the voice delay may be
reduced, but the network traf-
fic may be high. If a large
value is defined, the voice
delay and echo may increase,
but the network traffic may be
lower.
1 (G.711)
1: Reserved
2: 20ms (160byte)
3: 30ms (240byte)
2
2 - Reserved
---
-
3 (G.729)
1: Reserved
2: 20ms (20 byte)
3: 30ms (30 byte)
4: 40ms (40 byte)
5: 50ms (50 byte)
6: 60ms (60 byte)
7: 70ms (70 byte)
8: 80ms (80 byte)
2
4 (G.723.1)
1: 30ms (24 byte)
2: 60ms (48 byte)
1
Item No.
Item
Input Data
Default