3. USE OF THE WHEELCHAIR
www.neatech.it
15
Powered mode
Set the release engine lever as shown in Figure 17 and in Figure 18.
In this configuration, the brakes are on and the wheels will not
move.
Use the switch (I), see Figure 14,
to on off the Speedstar.
The switch also has the function of protecting the wheelchair from
overloaded current and short circuit.
If the power chair suddenly stops, use the switch to turn on the
chair. If the problem still continues, please contact technical
support.
Figure 17
Figure 18
Seeing Figure 15 and Figure 16 use the button 11 to turn on the
command console. Use button 6 and 16 to select the travel speed.
Chosen level is shown by the indicator 15.
Use the controller 20 to get in gear. Its proportional functionality
allows you to adjust speed and direction according to the intensity
with which you act on the controller.
Releasing the lever of the controller automatically activates the
electromagnetic brake that locks the wheels of the Speedstar.
Summary of Contents for Speedstar
Page 4: ......
Page 37: ...6 CONTROL AND MAINTENANCE www neatech it 32...
Page 43: ...7 FAULT REPAIR AND ASSISTANCE...
