4. ADJUSTMENTS
www.neatech.it
22
Width
C
Figure 24
Loosen the 2 screws
indicated in Figure 24 and
move the armrest in
accordance with the
directions indicated to reach
the desired position and
tighten the screws again.
NOTE: For this operation use
a 6 mm allen wrench.
.
Joystick
Loosen the lever (L), as shown in Figure 25, so it is possible to move
the joystick in accordance with the directions indicated to reach the
desired position. Retighten the lever.
Figure 25
Summary of Contents for Speedstar
Page 4: ......
Page 37: ...6 CONTROL AND MAINTENANCE www neatech it 32...
Page 43: ...7 FAULT REPAIR AND ASSISTANCE...