5
WALL Family User manual NE41 12005-02 v2.0
Item Denomination
①
Place for 6.35 mm tele jack
connector/Pull cord/Key cylinder
②
Jumper J2
③
Jumper J1
④
AAA-battery connectors
⑤
Screw connector
⑥
Product (data) label
The screw connector
The screw connector allows for con-
necting external power, inputs and
outputs by cable to the WALL unit
.
10-28 VDC
Power
The unit can be powered either by
10-28V
DC
or 2 x AAA batteries
.
Inputs IN1 and IN2
In the screw connector there are
two wired inputs, IN1 (pin 6) and IN2
(pin 5). Both inputs have a common
ground (pin 7) and must be con-
nected to potential free contacts
.
Input activation is ignored during the
first 10 seconds after start up
.
Outputs OUT1 and OUT2
The outputs are galvanically sepa-
rated from the wired inputs and each
other and works according to below
.
ROOM and ROOM+PEAR
The relay outputs acts according to
the settings in the builtin actionplan
or by a superior system (by radio)
.
