SMOKE User Manual NE41 06004-02 v2.0
7 of 16
4
Adding a SMOKE to NEO
This is the recommended procedure for adding a SMOKE to a NEO.
1. Enter programming mode on NEO and select appropriate (first availa-
ble) radio position. (For more information about how to enter pro-
gramming mode in NEO, see corresponding NEO documentation.)
2. Press the Programming button (S2) on the adaptor board to activate
the adaptor board.
3. Exit from programming mode in NEO and make a test alarm to the
alarm central by pressing the SMOKE test button.
It is important that this procedure is followed since it transmits correct
alarm types to the alarm central when testing.
All SMOKEs must be programmed to different radio positions.
5
Stand Alone mode
When a SMOKE is operating in Stand Alone mode, it operates as a single
unit with no interconnection between other SMOKEs and communicates
directy with the radio receiver, e.g a Care Phone NEO or a portable
tranceiver TREX2G.
All alarms (user and technical alarms) are sent directly to the radio
receiver and handled individually.
nea
t
1
R
S
Picture 4.
SMOKE in Stand Alone mode
#
Denomination
S
SMOKE
R
Radio Receiver (in this example a Care Phone NEO)
Table 6.
Part denominations in Stand alone mode
