- 14 -
Before installation, please prepare suitable screwdriver, scissors or wire stripper in
advance.
Network cable length
ASP110 is equipped with a 25m audio cable as standard. If the length of the standard 25m
audio cable is not enough for the actual customer's conference environment deployment,
you can purchase the audio cable by yourself.
Laying and cabling
The audio cable shall be wired in the pipe slot in the ceiling and wall, and shall not be
wired together with the strong current cable, which is easy to cause electromagnetic inter-
ference and generate current noise.
ASP110 is a wall mounted loudspeaker, passive 4Ω/15W. It is not recommended to use a
third-party speaker. If really need use third-party speaker, it must meet the passive 4
Ω/15W specification.
2.5 Deployment of ASP110
Yellow-green light: device power on
Blue and white light flashes slowly: Device in upgrading
Pure red light: Device Muted
Blue-green light: Device in hybrid mode
Remote Meeting mode: Blue and white light: Device in remote meeting mode
Solid blue light: Device in local sound reinforcement mode
2.4.4 A40 Indicators
2.5.1 Power supply of ASP110
2.5.2 Cable length/cabling
ASP110 wiring mode is using audio terminal, red terminal is positive (+), black terminal is
negative (-); The AMX100 side is the Phoenix terminal wiring mode. When facing to the
Phoenix terminal, the left side is positive (+) and the right side is negative (-). The specific
wiring diagram is as follows:
2.5.3 Wiring mode
