background image

1. safety instructions 

Child Safety: Keep the device Out of Reach. 

carefully check the integrity of the device and connectors. 

To  avoid  overheating  and  possible  fires  do  not  install  the 
device  in  a  sealed  environment,  Always  choose  a  well 
ventilated area. 

Do  not  place  the  device  on  highly  flammable  surfaces  or 
environments (eg: paper, cloth, etc.). 

do not cover the cooling slits on the side and the fan on the 
top. 

do  not  install  the  device  near  flooded  batteries:  they 
produce  flammable,  corrosive  and  explosive  gas  while 
working, and it can damage the product. 

protect the device from sunlight or direct sources of heat. 

To  avoid  malfunctions,  DO  NOT  install  and  use  the  device  in 
very  humid  environments,  in  contact  with  water  splashes, 
various liquids, or exposed to rain. 

To avoid risk of electric shock and/or fire, the vehicle's fuel 
system must be in good condition. 

in case of damaged connecting cables or inadequate section, 
immediately replace them with suitable cables as specified by 
this manual or by a qualified electrician. 

in case of anomalies in the conformity of the product do not 
use it! it is strictly forbidden to open the device. Repairs may 
only  be  carried  out  by  qualified  technical  personnel  using 
original spare parts. 

Keep the instruction manual near the device for easy access 
to the essential safety, use and maintenance information. 

The  information  contained  in  this  manual  may  be  changed 
without  notice.  NDS  Energy  s.r.l.  reserves  the  right  to  make 
changes  and  improvements  to  the  product  at  any  time 
without  notice  and  without  obligation  to  apply  these 
changes to the devices previously distributed. 

The  images  of  the  products  are  purely  indicative  and  may 
t h e r e f o r e  n o t  b e  f u l ly  r e p r e s e n t a t i v e  o f  t h e 
characteristics  of  the  product,  differing  in  color,  size  or 
accessories.

 

 4

Summary of Contents for POWERSERVICE PLUS 25













































Reviews: