24
Document Number
DCV-00545
Date Released
Jul. 2020
Revision Number/Security level
R01 S2
Retrofit OPTIC 5 Touch+ InvencoLink Wayne Ovation (US & Canada)
Installation Guide
17.
Unplug every cable on the QCAT Board Assembly and unscrew any ground screws that may be
fastened to the board. The amount of connections may vary depending on customer
specifications when the dispenser was purchased, however, each cable must be unplugged
regardless. (Fig 6)
Note:
Mark the Pump communication cable (Purple & Brown wires) for re-connection in a later
step. All of these other wires can be discarded.
Fig 6
–
Unplug every component on the QCAT Board
Ground
screw
Ground
screw
Pump Communication
Cable
