44
Document Number
DCV-00545
Date Released
Jul. 2020
Revision Number/Security level
R01 S2
Retrofit OPTIC 5 Touch+ InvencoLink Wayne Ovation (US & Canada)
Installation Guide
20. Gather the YELLOW, BLACK and GREEN/YELLOW cables from the above steps into a cable-tie
on the upper left rear (as viewed from its rear) of the OPTIC 5 Touch OPT RFK Door. Draw any
excess cable length back towards the pump door hinge, and re-secure them with the
dispenser’s
cable clip used in step 18.
21. Install the MZ0116 Isolating Cover over the rear of the OPTIC 5 Touch OPT, onto the RFK Hatch
Door.
a. Place the cover with the ground tab to the left over the OPTIC 5 Touch OPT, ensuring
that the cables exit the cover above the Stand-Off by the earth tab, and that no cables
are snagged.
OPT Printer
¼” Earth Tab