manualshive.com logo in svg

NCR Orderman7, User Manual, Page: 23 / 57

Share
Download
NCR Orderman7 User Manual Download Page 23

 

Fehler! Kein Text mit angegebener Formatvorlage im Dokument.

                             User Guide V01.06    

Service station and multi service station 

Orderman GmbH (Part of NCR Corporation) 

23                               

 
 
 

7.3 

Overview of the multi service station 

The multi service station is designed to simultaneously charge up to five handhelds and up to five 
battery packs. The service station and multi service station also provide an IP-based Ethernet 
connection to the host system.  

Fig. 13: Multi service station 

 

 

Multi service station 

 

Charging contacts, handheld charging slot 

 

Charging status LED fast-charging slot 

 

Network status LED 

 

Power LED 

 

Protective cover for charging contacts on the 
quick-charging slot 

 

Connection for Orderman power supply  

 

2x RJ45 Ethernet network port* 

 

* One of the two Ethernet ports can be used as a network connection for another Ethernet device. 

Front 

Back 

Summary of Contents for Orderman7


























































Reviews:

No comments