NCR NCR S16, Installation Manual

Page: 34 / 108

Performing a Full Installation of Windows NT Server 3.51
4-10 Installing Microsoft Windows NT Server 3.51
4. The installation program prompts you to enter your current date, time, and
time zone. After each item has been entered, select OK.
5. You may be prompted to identify various executable files which are
installed on your disk which the installation procedure could not positively
identify. These may include MS-DOS applications or other files. Select
the appropriate option for each, and select OK.
6. You are shown the video adapter which has been detected by the
installation process. Select OK to confirm the selection.
7. You are prompted to select the video driver configuration, including the
resolution, number of colors, and scan rate.
After you have selected the desired parameters, select TEST to verify the
video displays the resolution correctly. Follow the prompts on the screen
to complete the test. When you are certain that the selections are correct,
select OK to configure the video driver. Your system’s configuration is
saved.
8. You are asked whether you want to create an Emergency Repair Disk. We
strongly recommend creating an Emergency Repair Disk.
9. Select YES to create an Emergency Repair Disk. You are prompted to
insert a blank high-density disk into the drive. Select OK when you have
inserted the disk. The disk is formatted, and appropriate files are copied to
it.
Completing the Installation
To complete the installation, follow these steps:
1. You are informed that the Windows NT installation is complete.
WARNING: Contrary to the instructions on the screen, WAIT several
minutes before selecting REBOOT.
If you do not wait, the server’s caching disk controller may not have
enough time to complete all writing operations, and your system disk may
not be installed correctly.