manualshive.com logo in svg

NCR NCR S16, Installation Manual, Page: 24 / 108

Share
Download
NCR NCR S16 Installation Manual Download Page 24

Configuring the SCSI Adapters

3-4

Confirming the SCSI Adapter Settings

Send Start Unit Command

Yes

5. Press Esc to return to previous menu.

6. Select Advanced Configuration Options and set the parameters as follows:

Host Adapter BIOS (Config Util...)

Enabled

Support Removable Disks...

Boot Only

**

 

 Extended BIOS Translation...

Enabled

Display <CTRL-A> Message During BIOS Initialization...

Enabled

Multiple LUN Support

Disabled

BIOS Support for Bootable CD-ROM

Disabled

BIOS Support for Int 13 Extensions

Enabled

***

 

 Support for Ultra SCSI Speed

Disabled

7. Press Esc to return to previous menu.

8. Press Esc until prompted to save configuration. Save the configuration

and the system reboots.

                                                  

 

**Extended BIOS Translation should be disabled, and the drive should be
reformatted when using SCO Unix or SCO UnixWare. After changing
settings, reboot the system before formatting.

 

***Enable for use with Ultra drives only.

Summary of Contents for NCR S16













































































































Reviews:

No comments