Document Number
DCV-00202
Date Released
Oct. 2016
Revision Number/Security level
R01 S2
Retrofit G6+InvencoLink GVR Advantage (US) Installation Guide
c. Secure the plate in position using two MS0143 #6-
32 ¼” screws up into the bottom of the
plate:
Fig. 3.2
– Plate secured with screws
2. Plug the patch cables into the InvencoLink converter sockets:
a. For Side One the converter will be on the plate you have just installed.
i. Plug the EK0129 RED cable into the RS232-1 socket.
ii. Plug the EK0131 YELLOW cable into the LAN-1 socket.
b. For Side Two the converter will be on the plate on the other side of the dispenser and you
should run the two cables under any central electronics.
i. Plug the EK0129 RED cable into the RS232-2 socket.
ii. Plug the EK0131 YELLOW cable into the LAN-2 socket.
Fig. 3.3
– Side One
Patch Cable installation
Side Two
3. Temporarily coil the loose ends of the four cables (pre-installed Black low-voltage DC & Green/Yellow
Earth; and
Red and Yellow patch) in the cavity where you’re working.
4. Unlock the pre-assembled MP0550 RFK door from Section 4.2 (lock latch to vertical).
This panel may have
been removed.
6-
32 ¼” screws