Document Number
DCV-00202
Date Released
Oct. 2016
Revision Number/Security level
R01 S2
Retrofit G6+InvencoLink GVR Advantage (US) Installation Guide
Fig 1.8
– Unplug the card reader cable
7.
Place the loose cables from the options door components inside the dispenser cavity to set them out
of the way.
8.
Remove the factory lock assembly on the CRIND options door.
Note
:
The factory lock will be kept and reused during the installation process of the new
OPT kit. Discard only the latch; do not discard any other parts of the lock.
1)
Using a large Philips head screwdriver, remove the set screw, the latch, and the lock washer
from the back of the lock assembly. (Fig 1.9a,b)
Fig 1.9a
– Back side of lock assembly
Card Reader
Cable