14
Document Number
DCV-00402
Date Released
Jun. 2019
Revision Number/Security level
R02 S2
Retrofit G6+InvencoLink Wayne Vista 3V (US) Installation Guide
The remaining cables are attached to peripheral components that will be removed along with the
Display Assembly later in the disassembly process.
8.
For the Graphic Display Assembly:
Locate and remove the (3) ¼” head mounting screws located along the bottom of the Graphic
Display Assembly. (Fig 4.8a)
Fig. 4.8a
–
Location of the 3 screws that need removal
Note
:
There may be a variant design for the Card Reader Rain Catcher. The process for
removing the Graphic Display Assembly is identical to the one in Step 8, with the
exception that the rain catch has TWO screws fastening it instead of ONE. However,
only one of these screw
s will need to be removed. A 5” long screwdriver will be
needed to reach the screw. Use Fig 4.8b as a visual guide.
Mounting Screws
(One located below card reader)
