35
Document Number
DCV-00402
Date Released
Jun. 2019
Revision Number/Security level
R02 S2
Retrofit G6+InvencoLink Wayne Vista 3V (US) Installation Guide
a) Disconnect the Heater from the power distribution board.
Fig 4.13a
–
Disconnect power cable.
b) Determine if the Large Heater or Small Heater is installed (see Fig 4.13b and Fig 4.13c). If a
Large Heater is installed go to Step
13.1
. If a Small Heater is installed go to Step
13.2.
Fig 4.13b
–
Large Heater. Fig 4.13c
–
Small Heater.
13.1.
Large Heater Relocation:
a) Remove the Mounting Screws (four screws) and retain two of them to relocate the Heater. Discard
the other two.
