17
Document Number
DCV-00402
Date Released
Jun. 2019
Revision Number/Security level
R02 S2
Retrofit G6+InvencoLink Wayne Vista 3V (US) Installation Guide
11.
Remove the Q-CAT boards or Dual CAT board if present.
11.1 Q-CAT boards
a) Identify and locate the Q-CAT boards. It is fitted on the right-hand side wall per each side. If not
present, follow procedures for removing the Dual CAT board instead (step 11.2).
Fig. 4.11.1a
– Location of the Q-CAT board
b) Disconnect any cables connected to the Q-CAT Board. The Purple/Brown cable is used for
communications. It must be marked and retained for later use.
Fig. 4.11.1b
– Location of the Q-CAT board
