NCR 7455, Hardware User'S Manual

Page: 91 / 144

Chapter 3: Setup 3-17
Multiple ROM Menu
Move the cursor to Multiple ROM Menu and press Enter. The items on
this submenu are used to load/unload specific ROMs in the next boot.
1. Move the cursor to the appropriate Selectable ROM x option and
press Enter.
2. Select the desired setting from the drop-down menu.
•
Disabled – do not load ROM
•
Enabled – load ROM in next boot
Note: Due to space limitations, only enable the required ROMs.
Refer to the following table for ROM usage information.
ROM Use
On-board Intel
LAN Intel Ethernet hardware-specific portion of the
Ethernet Boot ROM. Requires the On-board Intel
PXE ROM to also be enabled.
Parallel CD-ROM
Boot Allows reloading of OS through a CD ROM
connected to the parallel port.
On-board Intel PXE PXE protocol portion of the Ethernet Boot ROM.
Requires the On-board Intel LAN ROM to also be
enabled.
WaveLAN Boot ROM for WaveLAN 802.11 PCMCIA card.
Requires WaveLAN PXE to also be enabled.
WaveLAN PXE PXE protocol ROM for use with the WaveLAN
ROM.
Beep Error Codes
The Beep Error Codes option enables/disables beep codes on error(s).
Move the cursor to Beep Error Codes, press Enter, and select On or Off.
Disabled
Enabled