14
7360-K068 Tri-Light/Lane Light with Camera Assembly and
Lane Light Label
4. Insert the Tri-Light/Lane Light cable through the opening in the side of Tri-
Light/Lane Light pole and route it out the top of the pole.
Note:
For the Tri-Light/Lane Light assembly without a camera, only the Tri-
Light/Lane Light cable extender exist in the assembly.
Tri–Light
Destination Connection (Location)
Tri-Light/Lane Light cable extender I/O Box (Tri–Light/Lane Light port)
Ethernet (LAN) cable extender
Ethernet (LAN)
I/O Box (Power) cable extender
I/O Box (Input Belt)
Tip:
To make routing the cable extender through the pole easier, first attach a
weight (for example, a large bolt) to a long piece of string and drop the weighted
end of the string through the Tri–Light/Lane Light pole. Once the string is threaded
through the pole, tie the non-weighted end of the string around the cable connector
and then pull the cable extender through the pole.
Note:
If installing a secondary display, route the display cables out of the smaller
hole on the back of the pole.
