4-26
Chapter 4: Servicing the Printer
8.
Lift the Thermal Mechanism up and out of the Base.
9.
Remove the switch or switches.
a.
Paper Out Switch: Turn the Mechanism over. Pry out the two
posts holding the switch in place. Pull the switch up and out
rotating it slightly to allow the arm to clear.
b.
Knife Home Switch: Remove the screw holding the switch to
the right side. Note wire routing for future reference.
c.
Cover Open Switch: Carefully pry the switch out from the right
side of the Mechanism. Note wire routing for reinstallation.
Paper Out
Switch
Knife Home
Switch
Screw
Cover Open
Switch
Thermal
Mechanism
Re-installing the Paper Out Switch, Knife Home Switch, and
Cover Open Switch
Reverse the procedures to re-install the Paper Out Switch, Knife Home
Switch, and Cover Open Switch.
Note:
If wires were removed, ensure they are routed as before.
