4-4
Chapter 4: Servicing the Printer
Procedure
To Access the Control PC Board:
Screw
Base Plate
1.
Open the Rear Cover and remove the paper from the printer.
2.
Disconnect all the cables from the printer.
Caution:
Electrostatic Discharge could damage the Control or Options
PC boards. Wear a grounded wrist strap and use a static mat or other
ESD protected work surface when handling electronic components.
3.
Close the Cover and place the printer on its front with the bottom
facing you (as shown above.)
4.
Remove the screw holding the Base Plate to the cabinet. Place to the
side for reuse.
