4-12
Chapter 4: Servicing the Printer
Paper
Guide
Bearing
Platen
Platen-Carrier
Assembly
Rear
Cover
Push out slightly
to remove cover
Gear
Re-installing the Rear Cover and Platen
Reverse the previous procedure to re-install the Platen.
1.
Re-install the Platen by snapping it into place, right-side bearing
first, into the Platen-Carrier Assembly with the gear to the left.
Note:
The Paper Guide should be flush against the Fixed Knife Blade,
if installed. A slight gap on the right side is normal.
After installation, rotate the Platen to ensure it moves freely.
