NComputing L-Series User Manual rev.05.07.12
Page
58
of
95
•
Remote View/Control allowed
: Displays whether or not the administrator has
configured the vSpace software to allow administrators to remotely view user and control
user sessions.
•
Clean up disconnected sessions not in use
: Displays whether the vSpace software
automatically looks for disconnected sessions that are not in use and logs them out after
a defined period of time. If this feature is turned off (set to “No” or “0”), when any access
device drops its connection, the connection remains active on the host. When the user
reconnects, their disconnected session is reconnected to their new session and all their
open files and applications are available again. Also, in this case, the only way to end a
disconnected session is for an administrator to stop the session from the console
software. If this feature is turned on (set to any whole number up to 999), the same
behavior applies, but when a session is disconnected, a timer starts. If the user
reconnects before the timer is up, their disconnected session is reconnected to their new
session and all their open files and applications are available again. If the timer runs out
and the session is still disconnected, the vSpace software will end the session by itself.
This makes sure that disconnected sessions do not reserve resources for an indefinite
period. By default, this is set to “5.”
•
Support WTSAPI32 Interface
: Displays whether or not the vSpace software has turned
on support for the WTSAPI32 interface.
•
Disable background-bitmaps under Windows XP
: Displays whether or not the user is
able to set their own background bitmap for their Windows desktop.
•
Do not display last user name
: Displays whether or not the vSpace software displays
the last user name that logged on using a particular access device. This is sometimes
enabled as a security measure.
•
UTMA/UTSA USB port support
: Displays whether the administrator has set the vSpace
software to allow using the USB port on L230 access devices.
•
Administrator Password
: Displays whether an administrator password is set.
•
Autologon on the Host Station
: Displays whether the host PC is set to boot up without
the Windows logon screen showing on the host PC.
•
Background Hardware Activation
: Displays whether the software silently activates
newly-connected devices.
•
Video Streaming Support
: Displays whether the host will provide streaming video to
compatible devices. (L300 only)
•
Accelerate Flash Globally
: Displays whether the host will leverage video streaming to
deliver high-quality Flash to the access device at the cost of higher processor utilization.
•
Compression Ratio (5-95 %)
: Displays the level of compression used on the access
device’s real-time output. A higher number results in higher display quality at the access
device, but also utilizes greater network bandwidth.
USB-Device Assignment(s)
Note: This feature is only available on the L200 (older model), L230, and L300.
