24
RECOMMENDATIONS AND MAINTENANCE
NCM
MUNICH N8C 36V
Maintenance Schedule
Tyre pressure
Tyre condition
Visual inspection
Brake lever pressure
Quick releases
Handlebar alignment
Saddle alignment
Battery pack locked
Wheel check
Clean and lubricate chain
Check brake pads
Lubricate forks
Lubricate brakes & cables
Lubricate folding mechanism
Check all bolts and torque settings
Clean bicycle
Charge battery
Check wheel spokes
Inspect rim condition
Inspect saddle, rails and clamp
Grease pedal bearings
Check hub bearings
Check headset bearings
Check bottom bracket bearings
Replace brake pads
Replace brake cables (depends on use)
Replace tyres (depends on use)
Each ride
Weekly
Monthly
6 Monthly
Yearly
Inspect frame condition
(include welds for fissures)
WARNING:
—As with all mechanical components, electrically power assisted cycles (EPAC) are subjected to wear and high stresses.
Different materials and components may react to wear or stress fatigue in different ways. If the design life of a component
has been exceeded, it may suddenly fail, possibly causing injuries to the rider. Any form of crack, scratches or change of
coloring in highly stressed areas indicate that the life of the component has been reached and it should be replaced.