19
5.3.2 CURRENT DISPLAY
The current indicator shows the present discharging current of the controller: each segment is 2A; six segments are
>=12A (The bar graph shows in real time the output power of the motor. 1 bar – low power, all bars – full power.)
5.3.3 SPEED DISPLAY
The speed display is as below. It displays the current riding speed of the e-bike.
5.3.4 BACKLIGHT INDICATOR
With the power on, press UP (+) for 1 second to turn on the backlight. Press it for 1 second again to turn off the backlight.
5.3.5 WALK MODE
Hold DOWN (-) for 2 seconds to enter the power-assisted walk mode. When the AUTO icon is lit, the E-bike will travel at
3.7 mph without the need for the rider to pedal. Assisted walk mode will cease when the “-“ button is no longer being
pressed.
5.3.6 ASSIST LEVEL SELECTION
Press UP (+) or DOWN (-) to change the PAS level and thus change the power output of the motor. The default mode is
PAS 1 and assistance ranges from level 0 to level 6. Level 0 provides no assistance from the motor. The levels are
customizable.
DISPLAY
NCM
MUNICH N8C 36V
