16
Computer Control of Taralist
Computer Override
The Taralist series controllers have some amazing abilities when it comes to
making decisions on their own based on the events you configure into them, but
you can take control of the relays at any time from a computer as long as
communications are established between your computer and the Taralist device.
The Taralist Series Relay controllers support a “Lite” ProXR command set. If you
are familiar with our ProXR series relay controllers, then the command set should
be easy to understand. We will provide a summary of all Taralist commands in
this manual, but for now, let’s explore some of the computer control features.
Interface Elements
The interface elements shown below allow a computer to take over control of any
relay and force the relays to a On or Off state. You may also turn all relays on or
off using the ‘Turn On All Relays’ and ‘Turn Off All Relays’ buttons.
You can also read the status of relays by clicking the ‘Read Relays 1-8 Status’. The
Status of the relay will be shown to the right of the button.
The slider at the top of the screen allows you to select which bank of relays these
commands are directed to. You may attach up to 32 banks or 256 Relays.
