Naxer
Tech
Limited
5 |
P a g e
Response Message
The Control Base shall send a response message to every alarm send through GPRS or SMS.
Format
%
RES
,Status
RES
Command to send a Response Message.
Status
Alarms acknowledged. This is a 32-bit Hex number corresponding to Alarm bits.
Example
%
RES
,
00000020
Status
00000020
The Control Base shall send a response message to every alarm sent to it through GPRS or SMS. If
the unit does not receive any response message within 3 minutes, unit will keep sending alarm to
Control Base. SOS alarm, Accident alarm, Doors open alarm, Car movement, Ignition started in
security mode alarm should be sent a response message by Control Base.
