Naxer
Tech
Limited
17 |
P a g e
Unit will store its location and status after every 1 kilometre and will send it
to Control Base after every 2 hours.
Tracking – Motion
Format
%
TRACK
,
4
, UploadInterval,
Distance(metres)
%TURNS,X
Settings are similar to STORE/UPLOAD tracking mode but with an addition that
whenever a motion is detected from accelerometer (motion sensor) and Storage
Interval has passed, a location will be stored for sending to server.
Example 1
%
TRACK
,4,
60
,
30
Tracking Command
TRACK
Tracking Mode
4 – Represents Motion mode
Upload Interval
60 seconds
Store Interval
30 seconds
This will store a location maximum one per 30 seconds if any movement
detected.
Tracking – Turn Based
Format
%
TURNS,
X
%TURNS,X
Instructs unit to store/send a location whenever the vehicle turns more X
degrees where X is in degrees ranges from 0 to 360.
This is very useful command to allow accurate mapping of tracks when vehicle
turns in the streets or goes around bends. 20 degrees turn setting is an optimal
one.
Example 1
-
Note:
On successful receipt of %TRACK command, unit will respond with confirmation of new settings.
The unit will confirm by sending back the first data packet or SMS right after placing the %TRACK command.
No phone calls or other SMS commands will be received during Real Time Tracking or other features that require the unit to go
GPRS online.
Maximum data storage available is 2,600-20,000(depending on model) data strings. If storage capacity exceeds, first stored
points will be overwritten.
