Naxa NPD-1003, Instruction Manual

Page: 11 / 32

www.naxa.com Page 11
Using the Remote Control
Aim the IR emitter of the remote control at the remote
sensor and then press a key. The remote control will
work within 15 feet of the remote sensor.
L L
Before using the remote, be sure to remove
the plastic protective tab from the battery
compartment.
Battery Installation
The remote control is powered by one
(1) CR2025-type battery.
1. Squeeze the tab of the battery com-
partment to the right while drawing
the compartment out.
2. Remove the battery and replace it
with a new “CR2025” lithium battery.
3. Replace the compartment.
L L
Batteries in the remote will
last for approximately 1 year.
Replace the batteries if the
remote control does not work. Always
dispose of batteries according to your local
municipal regulations.
L
⚠
The batteries used in the remote control
may present a fire or chemical burn if
mistreated. Do not recharge, disassemble,
incinerate, or heat the battery (~212°F). Do
not mix old with new batteries, or different
types of batteries. Remove the batteries
from the remote if it will not be used for a
long period of time. Keep batteries away
from children.
Do not spill water on the remote control.
Do not use the remote control for other
equipment at the same time.