9
6
SD, USB or Disc Operation:
1. SKIP UP / DOWN BUTTONS
Press the >>| button briefly to play next track.
Press the |<< button briefly to play the current track from the beginning of it if the playing
time is more than 2 seconds.
Press the |<< button briefly to play the previous track if the playing time is less than
2 seconds.
Press the >>| or |<< button and hold to skip forwards or backwards, release to resume
normal playback.
2. A.P BUTTON (Auto-storage /Preset scan)
During MP3/WMA file in disc, SD or USB mode, press the A.P button , it is activated
selecting song mode, and the TRK 000(if the number of tracks is less than 100 and
more than 9, it will be TRK 00) will be visible on the LCD display and the hundreds digit
0 that the MP3/WMA disc, SD card or USB contains will flash.
Rotate the VOL knob to select and enter the number on the flashing digit place from 0 to 9.
Then press the A.P button to confirm the entered number and the 0 on the tens digit
will be flashing.
Rotate the VOL knob to select and enter the number on the flashing digit from 0 to 9.
Then press the A.P button to confirm the entered number and the 0 on the units place
digit will be flashing.
Rotate the VOL knob to select and enter the number on the flashing digit from 0 to 9.
After finishing enter all the number of the song serial number on the flashing digit, press
the SEL button to play the corresponding track.
3. TOP/>||, INT, RPT, RDM BUTTONS
1) Press the TOP/ >|| button briefly to interrupt the playback of the disc, SD or USB.
Press again to resume normal playback of the disc, SD or USB.
Press the TOP/>|| button and hold for approximately 0.5 seconds to play the
first track of the disc, SD or USB.
2) Press the INT button to sample the first 10 seconds part of each track, and the
INT ON will be visible on the LCD display.
In the process of INT, press INT button again to stop sampling and to continue
playing the current track, and the LCD will display INT OFF.
3) Press the RPT button once to play the current track repeatedly, and the RPT
ONE will be visible on the LCD display.
During MP3/WMA disc, SD or USB mode, press the RPT button twice continuously to
play the current folder repeatedly, and the RPT ABM will be visible on the LCD display.
In the process of RPT, press RPT button again to stop playing repeatedly
mode and the LCD will display RPT OFF.
4) Press the RDM button to play all tracks on disc in random order, and the RDM
ON will be visible on the LCD display.
In the process of RDM, press RDM button again to stop playing in random order
and the LCD will display RDM OFF.
5) During the normal playback of MP3/WMA disc, SD, USB:
Press the radio preset button 6 and 5 to move up and down10 tracks at a time.
4. AUX INPUT JACK
Press the mode button to select auxiliary input playing mode. Then you can connect
any matched external audio device to this socket. Use the volume knob to adjust volume.
4. Accept/ Reject/ Hold/ End Call
A) During ringing, press TEL button to accept the call.
B) During ringing, press CLEAR button to reject the call.
C) During talking, short press CLEAR button to end the call.
D) During talking, press and hold the TEL button about 3-4 seconds it can do mobile phone
transfers to the car audio or the car audio transfers to mobile phone.
Note: During ringing, CALL OUT appears and then the phone number.
During talking, talking time appears.
5. Talking volume level setting
At talking status, use the VOL knob to adjust the sound output, but this volume level can
’t
be reserved.
Note: the default volume level is 25.
6. Dialling or receiving call at unit sleep mode
When the car radio is in standby mode (Acc on and Power off), when dialling or receiving
a call, the car radio will power on automatically. After the call is completed, the radio will
revert to standby mode.
7. To transfer the audio of a file played by Mobile Phone to the Car Audio Player
If the mobile phone supports A2DP and could play audio, when the Mobile Phone plays
an audio file(For some Mobile Phones, you must select Play by BT firstly), the playing will
be transferred to the Car Audio Player.
In A2DP mode, if the Bluetooth device of the Mobile Phone support AVRCP, the functions
of the >>|, |<< and PLAY/PAUSE buttons are the same as one in disc mode(no fast forward
/backward functions for the >>|/|<< buttons). The other buttons available in disc mode are
not available.
In A2DP mode, if the Bluetooth device of the Mobile Phone support AVRCP, pressing the
MODE button can switch on between the radio, disc, USB, CARD and A2DP. But after
entered the A2DP mode again, to resume the playback and transfer to the Car Audio
Player by the Mobile Phone, you must press the PLAY/PAUSE button.
In A2DP mode ,if the phone music play mode turn to the radio mode, you need to wait
about 10 seconds.
