3
12
Common and Radio Operation
:
1. To turn on/off the unit
Press any button except the EJECT and OPEN buttons to turn on the unit. The unit will
also turn on when a disc, SD card or USB stick is inserted.
Press the power button to turn off the unit.
2. To select playback mode
Press MODE button to select RADIO, DISC, CARD(after inserting SD card),
USB(after inserting USB stick) ,BT and AUX mode.
3. To adjust the volume level
Rotate the VOL knob to adjust the volume level during playback.
4. To mute or resume the sound
Press the MUTE button to eliminate or resume the sound immediately during playback.
To resume the sound immediately, can also rotate the VOL knob.
5. To display and adjust the clock time
Press the CLK button briefly to display time for 5 seconds on the display, and then
returns to its previous display unless the button is pressed again.
Then press the CLK button and hold for more than 1 second until the real time flashes
on the display. Then you can adjust HOUR or MINUTE by rotating the VOL knob.
6. To select and adjust the mode of the sound and menu
A) To select and adjust the sound mode:
Press the SEL button briefly, it is activated as selecting each mode of E. VOL.
-> VOLUME ->BASS ->TREBLE -> BALANCE -> FADER ->
When selecting a desired audio mode, rotate the VOL knob to adjust the audio effect.
In each mode, the waiting time is about 5 seconds, and the time waiting time is over,
it returns to the last display mode of tuner or CDP mode.
The control mode of E.VOL is operated with following numeric display.
- VOL: (MIN)00, 01,......46, 47(MAX).
- BASS/TRE: -07, -06,...,00,...+06,+07
- BAL: 0LR9, 1LR9, ..., 9LR9,..., 9LR1, 9LR0
- FAD: 0FR9,1FR9, ..., 9FR9,..., 9FR1, 9FR0
B) To select and adjust the menu mode:
When pressed and hold for 2 seconds, it is activated as cyclical mode of following
functions for user
’
s selection.
->BEEP (ON/OFF) -> USER SET(FLAT/CLASSIC/ROCK/POP)
->VOL(LAST/DEFA) ->CLK(ON/OFF)->CLK(12/24)mode.
After selecting the desired mode, rotate the VOL knob to select one setup item of the
desired mode.
BEEP ON/BEEP OFF
BEEP ON mode: The beep is generated when any key is pressed.
BEEP OFF mode: The beep sound is disabled.
INSTALLATION
To boost up the capability of anti-jamming,
please make sure fix tightly the metal support
strap into the metal joint that connect to the
chassis of the car.
METAL SUPPORT STRAP
METAL MOUNTING SLEEVE
DASHBOARD
To remove the unit out of the metal mounting sleeve,
insert the two supplied KEYS into the left and right side
slots of the chassis at the same time. Then pull the chassis
out of the metal mounting sleeve as shown in the right
illustration.
FRONT PANEL
PLASTIC TRIM RING
UNIT CHASSIS
Bend the tabs on the metal mounting
sleeve against the DASHBOARD with
a screwdriver.
INSTALLATION METHOD
This is an anti-theft installation method.
The main unit wears a METAL MOUNTING SLEEVE.
Please connect the wiring, eg, the Power Supply, the Speakers and the Antenna
according to the requirements of this Instruction Manual, then install the metal
mounting sleeve into the car as per the diagram illustrated below.
NOTE
Before mounting and operating
the CD player, remove the metal
mounting sleeve illustrated by the
arrows.
Remove the two screws that
fix the CD deck mechanism player
during transportation before
mounting the player.
RESET BUTTON
EJECT KEY
Push this reset button with a cuspidal
object to renovate the distorted program
once the program is distorted.
