TRACKFISH 6500
Installation and Operation Manual
57
NAVMAN
Press
once or more until the
Setup
menu is displayed, then select
System
:
Language
Select the language for the displays. The
options are: English, Italian, French, German,
Spanish, Dutch, Swedish, Portuguese, Finnish
and Greek.
Tip
: In case you can’t read the current
language, the language setting is found at the
top of the system menu.
Backlight
Select the backlight level for the keys and
display (see also section 2-3)
Night mode
Night mode sets the palette for all displays.
Normal palette, for daytime
All displays have a palette optimised for
night time.
See also section 2-3. To change only the chart
palette, see section 17-2.
Key beep
Enables or disables the beep when a key is
pressed.
Auto power off
See section 2-2.
17-1 Setup > System
Factory reset
This option returns all of the TRACKFISH
settings (except the language, waypoints and
routes) to the default factory settings shown
on the setup menus.
Sonar
Disable any sonar transducer and
disable sonar functions.
A sonar transducer is fitted. Enable
sonar operation.
See section 18-6.
Y Cable
No GPS/fuel Y cable is fitted.
A GPS/fuel Y cable is fitted.
See section 18.
SmartCraft
No SmartCraft gateway is fitted. Disable
SmartCraft functions.
SmartCraft gateway is fitted. Enable
SmartCraft operation.
See section 18-10.
Buddy track
No DSC VHF radio is fitted. Disable
Buddy track.
A DSC VHF radio is fitted. Enable Buddy
track.
See section 18-9
