Navman Smart 2005, User Manual

Page: 57 / 68

57
Smart

2005 for Pocket PC | User Manual
20. Continuous Continental
Navigation
Basemaps allow you to seamlessly navigate between installed maps without installing maps of all
regions along your route. Each Basemap covers a large area, such as Western Europe or continental
United States and contains main roads that connect cities and towns. On the Basemap, you can select
a road or POI as your departure point or destination.
All Basemaps:
• contain roads and ferry connections of high national and international importance.
• use less memory than would be necessary to install all equivalent detailed maps.
• exclude smaller roads and have a reduced level of geographical detail.
You can add and remove Basemaps using the Basemap Installer (see below).
Install Basemap
1. Open Smart

Desktop if it is not already open:
Start

Programs

Navman

Smart

Desktop 2005 for Pocket PC
2. On the Map menu, click Basemaps .
The Navman Basemap Installer window will open.
3. Click the appropriate
Add
button to install the Basemap to the Pocket PC, memory card
or memory card reader.
Activate Basemap on Pocket PC
1. From the Main Menu , tap Setup, then the Map tab.
The
Active Map Selection Settings
screen will open.
2. Select a memory location from the Location drop-down box to display a list of the maps
installed in each location.
3. Select the check box of the Basemap you require.
4. Tap
to accept the change and open the 2D Map screen.