Navman iCN 620 Page 104 User Manual Download | Manualshive

Page: 104 / 106

background image

104

NAVMAN

iCN 620 user manual

ý

17-2 FCC Statement

Note: This equipment has been tested and found to comply with the limits for a Class B digital device,
pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against
harmful interference in a normal installation. This equipment generates, uses and can radiate radio
frequency energy and, if not installed and used in accordance with the instructions, may cause harmful
interference to radio communications. However, there is no guarantee that interference will not occur in
a particular installation. If this equipment does cause harmful interference to radio or television reception,
which can be determined by tu

rning the equipment off and on, the user is encouraged to try to correct the

interference by one or more of the following measures:

Reorient or relocate the receiving antenna.

Increase the separation between the equipment and receiver.

Connect the equipment into an output on a circuit different from that to which the receiver

is connected.

Consult the dealer or an experienced technician for help.

A shielded cable must be used

when connecting a peripheral to the serial ports.

Copyright

© 2003 Navman NZ Limited. Navman is a registered trademark of Navman NZ Limited. Smart

S

and Back-on-Track

TM

are trademarks of Navman NZ Limited. All rights reserved.
Microsoft

®

Windows

®

98, ME, 2000 or XP, Microsoft

®

ActiveSync

®

, Internet Explorer are registered trademarks of

Microsoft Corporation.
Acrobat

Reader

®

is a registered trademark of Adobe Systems Incorporated. All rights reserved.

© 2003 Whereis Sensis is a trademark of Telstra Corporation Ltd., used under license.
© 2002 Navigation Technologies. NAVTECH ON BOARD is a registered trademark of Navigation Technologies
Corporation. All rights reserved.

Published in New Zealand

ý

«
...
102
103
104
105
106
»

Summary of Contents for iCN 620











































































































Reviews:

No comments

Related manuals for iCN 620

Brand: Renault Pages: 22

Brand: Uniden Pages: 46

Brand: River park Pages: 33

Clementine 8440

Brand: PNI Pages: 8

dezl 770 Series

Brand: Garmin Pages: 28

BENDIX/KING KCS55

Brand: Honeywell Pages: 88

MEXBT2700 - CD Receiver With Bluetooth Hands-Free

Brand: Sony Pages: 2

GMD-616 Marketing

Brand: Sony Pages: 1

Brand: Sony Pages: 2

Brand: Sony Pages: 6

Brand: Sony Pages: 16

Brand: Sony Pages: 44

Brand: Sony Pages: 60

Brand: Sony Pages: 124

MEXBT5700U - CD Receiver Bluetooth Hands-Free

Brand: Sony Pages: 224

Brand: Sony Pages: 288

MV-65ST - Dream Station

Brand: Sony Pages: 66

MEX-R5 - Multi Disc Player

Brand: Sony Pages: 90

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands