Version 28.02.2023
HW:CAM (V100)/(V23)
RL4-SC15
P
a
g
e
6
1.4.3.
Rear-view camera setting (dip 5)
If set to OFF, the interface switches to factory picture while the reverse gear is engaged to
display factory rear-view camera.
If set to ON, the interface switches to its rear-view camera input
„V4 Reverse“
while the
reverse gear is engaged.
1.4.4.
Front camera activation type (Dip 6)
If the dip switch is set to ON (and dip1 is set to ON), the interface switches from the rear
camera to the front camera input for 10 seconds after reverse gear is disengaged. In
addition, manual switching to the front camera input is also possible from any image mode
by pressing the button (short press).
With the dip switch set to OFF (and dip1 set to ON), automatic switch-back tot he front
camera is deactivated, but the manual front camera switching option via external keypad
remains.
1.4.5.
Video representation (dip7)
If dip7 is set to ON the inserted video is shown with big size.
If set to OFF the inserted video is shown with small size.
Note: Dips 4 and 8 are out of function and have to be set to OFF.
After each Dip-switch-change a power-reset of the Video Interface has to be performed!
1.5.
Settings of the 4 Dip switches (CAN functions – red)
All 4 dip-switches of the video interface have no function for normal use
and have to be set to OFF.
Dip position down is ON and position up is OFF.
Vehicle/Navigation
Dip 1
Dip 2
Dip 3
Dip 4
All vehicles
OFF
OFF
OFF
OFF
After each Dip-switch-change a power-reset of the Can-box has to be performed!
