Version 16.03.2023
HW: CAM(V100)/UP(V30) right
RL4-PCM60
P
a
g
e
26
3.
Interface operation
The interface’s external keypad can be used to switch the enabled inputs. Even if not
needed, the keypad should always remain connected to the video interface for support
purposes.
Long press of keypad (2-3 seconds)
By long pressing the external keypad (2-3 seconds), the video interfaces witches the input
from the factory video to the inserted video sources. Each long press will switch to the next
enabled input. Inputs which are not enabled will be skipped.
Note: The interface switches after releasing the switch (after long pressure).
Short press of keypad (only if DIP 1 is set to ON)
By short pressing the external keypad, the video interfaces witches from the factory video to
the front camera input and back to factory video.
4.
Specifications
BATT/ACC range
7V - 25V
Stand-by power drain
8mA
Power
340mA @12V
Video input
0.7V - 1V
Video input formats
NTSC
Temperature range
-40°C to +85°C
Dimensions video-box
117 x 25 x 103 mm (W x H x D)
