Version 16.03.2023
HW: CAM(V100)/UP(V30) right
RL4-PCM60
P
a
g
e
12
2.3.1.2.
Vehicles with
PCM 5.0
Disconnect the
grey female HSD connector
(colours may vary) at the rear-side of the head unit and
connect it to the waterblue coloured male HSD connector „TO LCD“ of the video interface.
Connect the female non-angled waterblue coloured HSD connector of the enclosed picture
signal cable to the waterblue coloured HSD+2 connector „HU IN“ of the video interface.
Connect the opposite female angled purple HSD connector of the enclosed picture signal
cable to the previously become free HSD connector of the head unit.
Note: Depending on the installation conditions, the enclosed picture signal cable may also
be mounted upside down, concerning it’s HSD connectors . However, it‘s connection must
only be made at the head unit!