Version 16.03.2023
HW: CAM(V100)/UP(V30) right
RL4-PCM60
P
a
g
e
13
2.3.1.3.
Vehicles with
PCM 6.0
Disconnect the female
purple
coloured female HSD connector (colours may vary) at the rear-side of
the head unit and connect it to the waterblue coloured male HSD connector „TO LCD“ of the video
interface.
Connect the female non-angled waterblue coloured HSD connector of the enclosed picture
signal cable to the waterblue coloured HSD+2 connector „HU IN“ of the video interface.
Connect the opposite female angled waterblue HSD connector of the enclosed picture signal
cable to the previously become free male
purple
coloured HSD connector of the head unit.
Note: Depending on the installation conditions, the enclosed picture signal cable may also
be installed upside down, concerning it’s HSD connectors . However, its’ connection must
only be made at the head unit!
