Version 10.08.2020
HW:CAM(V98)/(V31/ZK)
RL4-LR17
P
a
g
e
22
3.2.
By keypad
Alternatively or additionally to the factory infotainment buttons, the interface’s external
keypad can be used to switch the enabled inputs. Even if not needed, the keypad should
always remain connected to the video interface for support purposes.
(see next page).
Long press of keypad (2-3 seconds)
By long pressing the external keypad (2-3 seconds), the video interfaces witches the input
from the factory video to the inserted video sources.
Each press (approx. 2 sec) will switch to the next enabled input. If all inputs are enabled the
order is:
Factory video
video IN1
video IN2
factory video
…
Disabled inputs will be skipped.
Note: The interface switches after releasing the switch (after long pressure).
Short press of keypad (only if DIP 1 is set to ON)
By short pressing the external keypad, the video interfaces switches from the factory video
to the front camera input and back to factory video.
4.
Specifications
BATT/ACC range
7V - 25V
Stand-by power drain
6mA
Power
180mA @12V
Video input
0.7V - 1V
Video input formats
NTSC
Temperature range
-40°C to +85°C
Dimensions video-box
117 x 25 x 104 mm (W x H x D)
All manuals and user guides at all-guides.com
