Version 10.08.2020
HW:CAM(V98)/(V31/ZK)
RL4-LR17
P
a
g
e
11
2.5.
Connection – picture signal cable
Disconnect the female HSD connector of the vehicle harness from the rear-side of the
factory monitor and connect it to the waterblue coloured HSD connector
”HU IN”
of the
video interface.
Connect the not-angled female HSD connector of the enclosed picture signal cable to the
video interfaces’ HSD connector
“TO LCD“
.
Connect the opposite angled female HSD connector of the enclosed picture signal cable to the
previously become free male 4pin HSD connector of the factory monitor
Connect the 10pin Power/CAN cable’s female 10pin connector to the 10pin connector of the
video interface.
Disconnect the female 12-Pin AMP locking connector of the vehicle harness from the rear of
the factory monitor and connect it to the male 12-Pin AMP connector of the 10pin
Power/CAN cable.
Connect the 10pin Power/CAN cable’s female 12pin AMP locking connector to the previously
become free 12pin AMP connector of the monitor.
All manuals and user guides at all-guides.com
