Version 07.10.2021
HW: CAM(100)/(V50+V41)
RL4-ELiNK
P
a
g
e
20
3.5.
Picture settings
The picture settings are adjusted by the 3 buttons on the video-interface. Press the
MENU
button to open the OSD settings menu. To switch to the next menu item, pressing
UP
and
DOWN
will change the selected value. The buttons are embedded in the housing to avoid
accidental changes during or after installation. The picture settings have to be done
separately for AV1, AV2 and CAM while the corresponding input is selected and visible on
the monitor.
Note: The OSD menu is only shown when a working video source is connected to the
selected video-input of the interface.
The following settings are available
Contrast
Brightness
Saturation
Position H (horizontal)
Position V (vertical)
All manuals and user guides at all-guides.com
