Version 07.10.2021
HW: CAM(100)/(V50+V41)
RL4-ELiNK
P
a
g
e
11
2.4.
Connection – PNP Power/CAN cable
2.4.1.
Connection – PNP Power/CAN cable for 8pin monitor connection
Connect the enclosed PNP Power / CAN cable’s female10pin connector to the male
10pin connector of the video interface.
Disconnect the female 24pin connector of the vehicle harness at the rear side of the
head-unit and connect it to the male 24pin connector of the enclosed PNP
Power/CAN cable.
Connect the enclosed PNP Power / CAN cable’s opposite female 24pin connector to
the previously become free male 24pin connector of the head-unit.
All manuals and user guides at all-guides.com
