Version 26.01.2022
HW: CAM(100)/(V20/Y+V41)
CI-RL4-SY3
P
a
g
e
2
Contents
1.
Prior to installation
1.1.
Delivery contents
1.2.
Checking the compatibility of vehicle and accessories
1.3.
Connectors – video interface
1.4.
Dip switch settings
1.4.1.
8 dip – black
1.4.1.1.
Activating the front camera input (dip 1)
1.4.1.2.
Enabling the interface’s video inputs (dip 2-3)
1.4.1.3.
Activation of the Interface PDC Graphic (Dip 4)
1.4.1.4.
Rear-view camera setting (dip 5)
1.4.1.5.
Activating the guide lines (dip6)
1.4.1.6.
Monitor selection (Dip 7)
1.4.2.
4 dip - red
2.
Installation
2.1.
Place of installation
2.2.
Connection schema
2.3.
Connection - Sync3 full version as ALL-IN-ONE head-unit
2.3.1.
Connection picture signal cable
2.3.2.
Connection PNP Power / CAN cable
2.4.
Connection – Sync3 full version with tablet monitor and separate APIM
module
2.4.1.
Connection picture signal cable
2.4.2.
Connection PNP Power / CAN cable
2.5.
Special case: Sync 3 Light (R5) version with 6.5inch or 8inch tablet monitor
and radio module with HSD + Sync Connected Radio version with 4inch
monitor
2.6.
Installation with analogue connection (without CAN bus)
2.7.
Power supply output
3.
Connection – video sources
3.1.
Audio insertion
3.2.
After market front camera
3.3.
After-market rear-view camera
3.3.1.
Case 1: Interface receives the reverse gear signal
3.3.2.
Case 2: Interface does not receive the reverse gear signal
3.4.
Connecting video-interface and keypad
3.5.
Picture settings
4.
Interface operation
4.1.
By infotainment button
4.2.
By keypad
5.
Specifications
6.
FAQ – Trouble Shooting-Interface functions
